Technical Support for Jaksta Media Recorder

Support | Windows | Technical | Jaksta Media Recorder | DVR stops after 30 seconds on Cam4

DVR stops after 30 seconds on Cam4

Asked by CarlR @ 10 Sep 2015 22:09 / Views: 170

Using JMC 6.0.0.89 on Cam4 I have noticed today (10-09-2015) that when in DVR mode the stream stops after 30-31 seconds - it is a tidy stop i.e tagged and completed - although the stream in reality is still continuing ? I have rebooted and restarted but same effect each time.

Using WIndows 7 x64 and Firefox/Chrome

Any clues why this has started to happen ?


From CarlR @ 10 Sep 2015 21:09
Solved the problem - for some reason removing the registration key, restarting the program and entering in the registration key again has re-enabled the DVR recording +30 seconds - odd that at no time did the program indicate it had flipped back to a "trial" mode.

 


From CarlR @ 10 Sep 2015 22:09

You might have stop on silence on?

Cam4 can be downloaded btw using this beta version.

http://downloads.jaksta.com/release/jak6/JMR6/6.0.0.89/JMR6-6.0.0.89.exe


New official release will be out later tonight and available from the downloads page.


From CRS @ 11 Sep 2015 07:09
Thanks - no silence tracking was not on - seems that Cam4 are inserting ads into the DVR stream (but do not appear via the browser)

 


From CarlR @ 15 Sep 2015 21:09