Technical Support for Jaksta Media Recorder

Naming rules

Asked by Pyotr @ 21 Jun 2017 21:06 / Views: 27
Hello! When recording a stream, Jaksta creates files by template {name} {0}. What it is necessary to make, that a file name was created under such template YYYY-MM-DD {name} {0}? The {Y} - {M} - {D} {name} {0} template does not work (file names are "2017-06-21 {name} {0}", that is, {name} {0} does not change)


From Pyotr @ 21 Jun 2017 21:06

Enter {Y}-{M}-{D} {title} in, when files are tagged apply the following naming rule.



 {name} {0} is a duplicate naming rule. Ie it's applied when a file with the same name exists.

From CRS @ 22 Jun 2017 09:06

I have such settings.

When writing a stream, the name is not correct.

Where is the problem? Thanks!

From Pyotr @ 24 Jun 2017 03:06

Sorry your images show you don't have the same as I have shown.  Please look at the images I attached and the associated instructions.

From CRS @ 26 Jun 2017 18:06




From Pyotr @ 29 Jun 2017 04:06

You have the initial tile filled out.  That is not going to get you what you want.  Please have a look at my images.  They clearly show what is required.  You need to turn on the Enable ID3 naming and fill out the settings as shown.

From CRS @ 29 Jun 2017 07:06

I set the settings.

The name of the stream is incorrect.

What is wrong?




From Pyotr @ 20 Jul 2017 04:07

That is an ID3 naming rule and is applied once a capture is complete.  The mpg format does not support ID3 tagging so that rule won't be applied.  Set up an auto convert to a file type that does and you will get that naming rule applied.


From CRS @ 20 Jul 2017 08:07