Technical Support for Jaksta Media Recorder
Recording Webrtc on myfreecams
Asked by Gary Garyson @ 09 Apr 2019 20:04 / Views: 251
MFC is switching from flash to webrtc when running jaksta media recorder it dont detect the webrtc stream at all
Do I need to switch a setting or is it something that will be fixed in future?
From Gary Garyson @ 09 Apr 2019 20:04
I see DASH streams still which is the protocol they have been using for a while.
Could you provide debug logs if you see video and audio streams over webrtc. We support the webrtc implementations used by several sites, but each needs to be implemented differently.
From CRS @ 10 Apr 2019 10:04
They have beta WEBRTC the models can choose to use, most still using the old flash currently
From Gary Garyson @ 11 Apr 2019 02:04
Ok. Please provide debug logs or details on models who use this currently so we can have a look.
From CRS @ 11 Apr 2019 08:04
I dunno if giving model names will help because they probz wont be online when you look
If you enable flash then keep clickin next model after a few you will come on a model using WEBRTC, you will know becaus as cam loads instead of just "loading webcam.." it will say loading webcam with a green arrow and then a spinning green disc, that means they using WEBRTC which jaksta dont' detect at all as a stream
I've attached what it looks like
Cheers for the help!
From Gary Garyson @ 11 Apr 2019 22:04
Hello there, here are examples of models which use it but as stated above its now 99% of them so pretty much any model you click on.
https://www.myfreecams.com/#Eve___ https://www.myfreecams.com/#AsianLuv_4U https://www.myfreecams.com/#KimKidmon https://www.myfreecams.com/#MsLily https://www.myfreecams.com/#VivianisHere https://www.myfreecams.com/#Agostinha_Red https://www.myfreecams.com/#AllisonDesire https://www.myfreecams.com/#Ana_xo https://www.myfreecams.com/#EmilyEvansX https://www.myfreecams.com/#GoGoDream https://www.myfreecams.com/#Grace https://www.myfreecams.com/#Jenny_Dove https://www.myfreecams.com/#JulyaWild https://www.myfreecams.com/#Kate_Mistress
Apart from above i tried to get you guys some logs. Unsure if there will be anything useful for you but here you are... I will just state this was working for me 100% since i bought this software so i am not doing anything new here.
What i did after enabling debug mode on startup and re-starting jaksta:
- enabled "automatic detect and download video"
- open MFC main page
- open some MFC model on same tab in chrome browser
- waited 10 seconds
- repeated above 2 steps few times
- (just as experiment if it will produce any useful logs tried also following ) paste address "https://www.myfreecams.com/#VivianisHere" into URL field which was currently streaming into and hit "digital video record"
- waited 10-20 seconds in which recording failed
- went to support tab and generated log
From master pow @ 13 Apr 2019 00:04
@masterpow you have to enable flash
It aint 99% its more like 1 out of 25 or maybe 1 in 50
Top models more likely because you need desent internet
From Gary Garyson @ 13 Apr 2019 00:04
@gary garyson I did enable flash prior to doing all above. (forgot to mention it so thanks)
From master pow @ 13 Apr 2019 02:04
Im not seeing what you guys are seeing for some reason. Yes there is Web socket traffic but that is only the chat, media stream is still Dash (MPD manifest) which is detected and captured fine. No flash required as per screenshot.
@gary can you please get me debug logs.
From CRS @ 15 Apr 2019 08:04
@master pow you have HTTPS/SSL monitoring switched off according to your logs, and they also show an audio recording in progress as well as AUTO mode switched on.
MFC is using https so you will need to switch that on to detect anything. Settings > Internet Downloads
Whilst you can audio record and internet download at the same time, please just provide logs showing the issue you are having as the logs become extremely hard to follow otherwise.
From CRS @ 15 Apr 2019 09:04
Hey! i dunno what I'm looking at with the logs, but I searched webrtc
ExtractionEngineDownloader: Not supported: video844.myfreecams.com/webrtc-session.json
Told ya it was webrtc not dash
Again though I do thank you for the help lol
From Gary Garyson @ 15 Apr 2019 23:04
So did the debug log help? is this something you could upgrade jaksta to do? thanks! appreciate ya
From Gary Garyson @ 19 Apr 2019 07:04
Will try and support in next release.
From CRS @ 23 Apr 2019 11:04
Cheers @CRS ! that would be mega
From Gary Garyson @ 23 Apr 2019 17:04
Hey! saw there was an update to Jaksta and was hoping I could now downloads the webrtc mfc streams but still no luck! was this something you didn't include this time? :( cheers pal!
From Gary Garyson @ 29 Apr 2019 23:04
Yes that was an emergency release to support slight changes to YouTubes dash protocol.
Still working on MFC's webrtc implementation.
From CRS @ 30 Apr 2019 07:04
Oh cool cool, yeh I see you had your hands full with youtube threads! ok pal cheers for the update :)
From Gary Garyson @ 30 Apr 2019 09:04
From Tony @ 02 Jun 2019 05:06
By the way, I have just found a workaround: with plugin "Disable WebRTC" being installed streams from MFC are broadcasted with regular flash.
From Tony @ 02 Jun 2019 06:06
So are you neva gonna do a fix for this?
From Gary Garyson @ 11 Jul 2019 03:07
Their Webrtc implementation is not looking good as it is encrypted and their servers won't accept a request for an unencrypted stream.
However, they still provide HLS and dash streams that are detected and captured just fine in AUTO mode. At the moment Im working on adding support to the extractor for them, which will allowthem to be used in the live monitor and using drag and drop etc.
From CRS @ 11 Jul 2019 07:07
The latest extraction engine update now support myfreecams, so you no longer have to use AUTO mode.
Just enter the myfreecams models url in the "Enter (or drag and drop) the URL of a video page to download" (ie https://www.myfreecams.com/#<model>)
You can also monitor your favorite MFC cams using the Live cam Monitor function (the Monitor tab)
From CRS @ 18 Jul 2019 12:07
Legend! thanks CRS you are the man mate
From Gary Garyson @ 10 Aug 2019 04:08
Using trial of latest version I get "Url is unsupported. Please try the AUTO or DVR capture methods" I am also unable to monitor any models. I am using https://www.myfreecams.com/#<model> for the dl and monitor input. I have tried with try mobile site on and off under extractor settings. What am I missing? DVR recording though built in browser does work but I can already do that with browser extensions.
This software looks great and I would like to buy it if I can sort out the stream dl and monitoring features.
From Ovw9 @ 28 Sep 2019 04:09
MFC works here still in extraction mode.
Please provide debug logs so we can see what is happening on your machine.
From CRS @ 30 Sep 2019 08:09
I needed to add the MFC domain into the extractor url list. Working great now and I purchased this morning.
From Ovw9 @ 01 Oct 2019 01:10